(D6 of Arduino connected to Din of WS2812B) It is highly recommended to connect a 100nF capacitor across the ‚5v and Gnd‛ connection, and a 100-470 Ohm resistor in series with the ‚Din‛ line of the ...

Description: Using an Arduino or a micro controller we can generate cool looking patterns with an led strip with addressable LEDs. In this case I'm using an Arduino uno (clone board) and a strip of ...

1 string of 50 addressable RGB LED lights 1 Arduino 1 micro-USB cable 1 9-volt battery holder with a switch 1 9-volt battery 1 set of three-pin JST SM Plug and Receptacle Cable Set Solder ...

[Patrick] was prepping for some future projects he had in mind, for which he will need a simple 2D array of addressable LEDs. While it is certainly possible for him to build his own LED array and ...

Smoke machine:** - Vape - Air pump - Plastic/silicone tube - Liquid container - T/L connectors (for the tubes) **Other ...

Some work with Arduino Nanos and a Raspberry Pi later, and he had a very acceptable LED matrix table. An attractive hack, you might say, and leave it at that.